It is currently Wed Dec 13, 2017 1:27 am


All times are UTC



Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Sun Mar 30, 2014 3:22 pm 
4000 rpm

Joined: Thu Feb 07, 2008 3:16 pm
Posts: 316
Location: Kuala Lumpur,Malaysia
Despite spending a lot on it, it never seems to run properly,'
changed ECU, plug wires, rotor, dist cap, idle valve, gearbox etc.
after a gbox change it barely ran properly for a1-2 k miles and the 2nd and 3rd gears started crunching, idle always stalls when cold,
hyd pump on 3rd one, always leaking but 3rd one seems ok, temp reading at 90/95 and near 100,
I gonna yank out this engine and shove in a 2-lit 16V 135 bhp XU10JR4 with a gearbox and a xantia hyd pump,i hv a xan2 with the eng and its faultless,
with its ECU and run a modern setup with a 8V larger radiator , I just cant seem to use the car without something going wrong.. after all i nvr get to use the full 160 bhp , i think 135 bhp will be fast enough...with AC ,the temp here is high and something always gives way, the past year barely moved 2k miles..
Will post pics when the work is under way.


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Theme created StylerBB.net