BX16Valve
http://www.bx16v.co.uk/phpBB3/

bx16v top heater matrix hose
http://www.bx16v.co.uk/phpBB3/viewtopic.php?f=11&t=2438
Page 1 of 1

Author:  greendale65 [ Wed Dec 31, 2014 5:24 pm ]
Post subject:  bx16v top heater matrix hose

Hello all, Any one out there got the top heater matrix
hose for my valver. 8) 8)
Happy new year to you all.
:) :)

Author:  Vanny [ Thu Jan 01, 2015 11:00 pm ]
Post subject:  Re: bx16v top heater matrix hose

Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?

Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2

These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers

Author:  Vanny [ Thu Jan 01, 2015 11:17 pm ]
Post subject:  Re: bx16v top heater matrix hose

Have you considered a generic flexible hose such as these

http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html

I use hose world a lot through work so can recommend them

Author:  greendale65 [ Sat Jan 03, 2015 10:49 am ]
Post subject:  Re: bx16v top heater matrix hose

Vanny wrote:
Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?

Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2

These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers


Hello Vanny, Reason at the moment not buying from bakers
I have a lot of jobs to get done on my valver owing
to the fact the garage who was looking after my car
did not do some work correctly , this came to my attention
when I took my car to main Citroen garage,
so at this time I'm hoping to get a used
top matrix , if I had no other jobs to be done
would go to Baker .
( Will give it a month if nothing turns up
will have to rethink .) :( :(
Thanks for your help on this.

Author:  greendale65 [ Sat Jan 03, 2015 11:00 am ]
Post subject:  Re: bx16v top heater matrix hose

Vanny wrote:
Have you considered a generic flexible hose such as these

http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html

I use hose world a lot through work so can recommend them


Hello again, Would you know the diameter on these matrix hoses.
Thanks Alan :?

Author:  Vanny [ Mon Jan 05, 2015 10:36 pm ]
Post subject:  Re: bx16v top heater matrix hose

Service Citroen lists the upper hose as

HEATER WATER HOSE
DIAM 19,2X27,4

So I would guess 19.2mm id and 27.4mm OD.

And the lower hose as

HEATER WATER HOSE
DIAM INT 20 ET 22

Author:  greendale65 [ Tue Jan 06, 2015 9:56 am ]
Post subject:  Re: bx16v top heater matrix hose

Vanny wrote:
Service Citroen lists the upper hose as

HEATER WATER HOSE
DIAM 19,2X27,4

So I would guess 19.2mm id and 27.4mm OD.

And the lower hose as

HEATER WATER HOSE
DIAM INT 20 ET 22


Thanks will give it a go. :)

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/