It is currently Mon Feb 19, 2018 1:48 pm


All times are UTC



Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Wed Dec 31, 2014 5:24 pm 
Tick Over

Joined: Wed Dec 31, 2014 12:57 am
Posts: 10
Hello all, Any one out there got the top heater matrix
hose for my valver. 8) 8)
Happy new year to you all.
:) :)


Top
Offline Profile  
 
PostPosted: Thu Jan 01, 2015 11:00 pm 
Web Support
User avatar

Joined: Tue Jun 06, 2006 10:11 am
Posts: 1444
Location: elsewhere
Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?

Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2

These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers


Top
Offline Profile  
 
PostPosted: Thu Jan 01, 2015 11:17 pm 
Web Support
User avatar

Joined: Tue Jun 06, 2006 10:11 am
Posts: 1444
Location: elsewhere
Have you considered a generic flexible hose such as these

http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html

I use hose world a lot through work so can recommend them


Top
Offline Profile  
 
PostPosted: Sat Jan 03, 2015 10:49 am 
Tick Over

Joined: Wed Dec 31, 2014 12:57 am
Posts: 10
Vanny wrote:
Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?

Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2

These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers


Hello Vanny, Reason at the moment not buying from bakers
I have a lot of jobs to get done on my valver owing
to the fact the garage who was looking after my car
did not do some work correctly , this came to my attention
when I took my car to main Citroen garage,
so at this time I'm hoping to get a used
top matrix , if I had no other jobs to be done
would go to Baker .
( Will give it a month if nothing turns up
will have to rethink .) :( :(
Thanks for your help on this.


Last edited by greendale65 on Sat Jan 03, 2015 11:01 am, edited 1 time in total.

Top
Offline Profile  
 
PostPosted: Sat Jan 03, 2015 11:00 am 
Tick Over

Joined: Wed Dec 31, 2014 12:57 am
Posts: 10
Vanny wrote:
Have you considered a generic flexible hose such as these

http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html

I use hose world a lot through work so can recommend them


Hello again, Would you know the diameter on these matrix hoses.
Thanks Alan :?


Top
Offline Profile  
 
PostPosted: Mon Jan 05, 2015 10:36 pm 
Web Support
User avatar

Joined: Tue Jun 06, 2006 10:11 am
Posts: 1444
Location: elsewhere
Service Citroen lists the upper hose as

HEATER WATER HOSE
DIAM 19,2X27,4

So I would guess 19.2mm id and 27.4mm OD.

And the lower hose as

HEATER WATER HOSE
DIAM INT 20 ET 22


Top
Offline Profile  
 
PostPosted: Tue Jan 06, 2015 9:56 am 
Tick Over

Joined: Wed Dec 31, 2014 12:57 am
Posts: 10
Vanny wrote:
Service Citroen lists the upper hose as

HEATER WATER HOSE
DIAM 19,2X27,4

So I would guess 19.2mm id and 27.4mm OD.

And the lower hose as

HEATER WATER HOSE
DIAM INT 20 ET 22


Thanks will give it a go. :)


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Theme created StylerBB.net