It is currently Tue Jun 19, 2018 7:40 pm


All times are UTC



Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Several parts needed
PostPosted: Wed Jun 12, 2013 9:00 am 
Administrator
User avatar

Joined: Mon Jun 26, 2006 9:02 pm
Posts: 1330
Location: Lincolnshire
Hi everyone
I am in need of the follow in good condition, I have cash but may be able to help you with something you need too.

Monza front seat a pair
Glovebox
Heater duct that runs behind glovebox
Complete steering column shroud with all screws and grommets taht screws drive into, most important is the two grommets that the two TX5 screws drive into behind the steering wheel
Left and right plastic trims that cover te front crossmember that the front seats bolt onto
Rear mudflaps
OE tailpipe, backbox or Sebring back box
16 valve badges both side panel badges abd both tailgate badges

Many thanks
Luke

_________________
Please call me Luke :)
1989 BX 16valve White 69k - Restoring to original ready for 2017
1990 BX 16valve Silver - Almost complete


Top
Offline Profile  
 
 Post subject:
PostPosted: Fri Jun 14, 2013 7:00 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
Hi Luke. Believe there are column bits sitting in the junk pile. May have bits of trunking - is it the triangularish shaped piece that goes to the vent?


Top
Offline Profile  
 
 Post subject:
PostPosted: Sat Jun 15, 2013 9:56 am 
Administrator
User avatar

Joined: Mon Jun 26, 2006 9:02 pm
Posts: 1330
Location: Lincolnshire
Hi Gary
Great to see you , hope you are well? Is your mobile number stil the same?

The duct is the pipe that runs from the passenger air vent along to the heater behind the glove box.

If you plan on visiting Cadwell again please let m eknow would be great to meet up again.

Thanks
Luke

_________________
Please call me Luke :)
1989 BX 16valve White 69k - Restoring to original ready for 2017
1990 BX 16valve Silver - Almost complete


Top
Offline Profile  
 
 Post subject:
PostPosted: Tue Jun 18, 2013 5:46 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
Have emailed some pics over of tailgate badges also column bits.

Nearest we get to you is Snetterton just south of Norwich. It is the next round of the Cannon Tin Tops and Quaife Modifieds.


Top
Offline Profile  
 
 Post subject:
PostPosted: Wed Jun 19, 2013 11:48 am 
Administrator
User avatar

Joined: Mon Jun 26, 2006 9:02 pm
Posts: 1330
Location: Lincolnshire
Thanks Gary, going through emails right now.

I wil try and get my bro to take a run out to Snett, I wil keep yu posted.

Luke

_________________
Please call me Luke :)
1989 BX 16valve White 69k - Restoring to original ready for 2017
1990 BX 16valve Silver - Almost complete


Top
Offline Profile  
 
 Post subject:
PostPosted: Wed Jun 19, 2013 7:05 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
Had not realised how many different badges* appear on tailgates. I'll carefully remove those already mentioned and check other tailgates for any more. Hopefully screws for column bits will be lurking somewhere.

If anyone requires parts from tailgate, bonnet, trim etc let me know and i'll have a look in the "junk" piles.


* 5 so far -

BX 16 Valve
ABS
BX GTi
CITROEN
16V


Top
Offline Profile  
 
 Post subject:
PostPosted: Thu Jun 20, 2013 10:08 am 
3000 rpm
User avatar

Joined: Mon Aug 07, 2006 11:52 am
Posts: 219
Location: East London
Hi Gary

I'm also after a full set of badges for the tailgate! So if you have any spare that would be great. If you had a full set of the following that would be great, but the "BX 16 Valve" one is the most elusive

CITROEN
BX 16 Valve
ABS

Let me know if you can be of assistance

Thanks
Rob
:D


Top
Offline Profile  
 
 Post subject:
PostPosted: Sat Jun 22, 2013 6:56 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
I'll have a look for you Rob. Luke some more pics for you in your email.


Top
Offline Profile  
 
 Post subject:
PostPosted: Sat Jun 22, 2013 7:38 pm 
4000 rpm
User avatar

Joined: Wed Aug 09, 2006 7:05 pm
Posts: 450
Location: Manchester
Hi Luke, how come you need front seats? On the off chance that it's because you have buckets and are returning to standard, I need a pair of buckets and I have a pair of Monza fronts to move on...

_________________
Red phase 1, 84k
Silver phase 1, 67k
"Man who run in front of car get tyred; man who run behind car get exhausted..."


Top
Offline Profile  
 
 Post subject: seats
PostPosted: Sun Jun 23, 2013 10:19 am 
Administrator
User avatar

Joined: Mon Jun 26, 2006 9:02 pm
Posts: 1330
Location: Lincolnshire
Hi Rob
Sorry I don't have nay buckets but I do need the Monxa front seats if you are selling them?

The silver valver was invaded by a family of mice during the winter and they shreeded both front seats and teh rear but I think I have spare rear set.

Thanks Gary, just replied :D

Thanks
Luke

_________________
Please call me Luke :)
1989 BX 16valve White 69k - Restoring to original ready for 2017
1990 BX 16valve Silver - Almost complete


Top
Offline Profile  
 
 Post subject:
PostPosted: Sun Jun 23, 2013 8:59 pm 
4000 rpm
User avatar

Joined: Wed Aug 09, 2006 7:05 pm
Posts: 450
Location: Manchester
Mouse damage, gutted! I'm conducting mouse warfare with one as we speak, the little bugger is in the cavity wall...

My seat situation is a bit complicated, in the red one at the moment I have a pair of Monza 16v items re-trimmed in leather, but if I sell them I have to give Kitch first dibs (long story but I bought them when he should have had first refusal on them). On the silver one (er, I've got two now) I have a standard Monza interior. It's not out of the question that I put the leather ones in the silver one, buy some buckets and have some standard Monza fronts spare... But its more likely that I sell the leather ones to Kitchen and buy buckets...

Anyway, I'll let you know ASAP :)

_________________
Red phase 1, 84k
Silver phase 1, 67k
"Man who run in front of car get tyred; man who run behind car get exhausted..."


Top
Offline Profile  
 
 Post subject:
PostPosted: Tue Jun 25, 2013 8:02 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
Gary C wrote:
I'll have a look for you Rob. Luke some more pics for you in your email.


Only found the 5 listed so far but still many bits and pieces to trawl through.

Does not help when Xsara stuff seems to have got mixed in with BX bits!


Top
Offline Profile  
 
 Post subject:
PostPosted: Sun Jul 28, 2013 7:08 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
So do you want one of each badge Luke? Plus column parts and duct.


Top
Offline Profile  
 
 Post subject:
PostPosted: Wed Jul 31, 2013 7:03 pm 
4000 rpm

Joined: Thu Aug 03, 2006 5:36 pm
Posts: 397
Location: Gatwick
Column bits, duct and badges are on the way to you Luke.

Sorry Rob, the only badge I have left at present is a 16v one.


Top
Offline Profile  
 
 Post subject:
PostPosted: Tue Aug 06, 2013 5:44 pm 
3000 rpm
User avatar

Joined: Mon Aug 07, 2006 11:52 am
Posts: 219
Location: East London
no worries Gary, many thanks for looking anyway 8)


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Theme created StylerBB.net